Electronic Box-Chopper & Custom Motorcycle Wiring

Click here to see wiring diagram

With the cycle - control it is possible to steer the functional
set-up starter / low beam - high beam / horn / direction
indicator R-L with a  micro button or foil button over
the vehicle ground at the installed handlebars or
handle fittings.

A short touch on of the micro button would steer the
function. Our blink transmitter is universal. independently
of load from 12 volt DC 0,1 - 100 W the blink frequency
remains unchanged.
No problems with Kellermann LED - direction indicators
or micro - direction indicators when mounted.

This module offers the following functions

- Left- and right direction 
  indicator. Clock pulse
 1 sec.
- Low beam light / High
  beam light.
- E-Starter.
- Horn

See Also:

• Kellerman Turn Signals - Kellerman Turn Signals and LED Indicators - BL-1000 White SG Indicator in Chrome Black Satin and Polished Finish for Harley-Davidson, Chopper and Custom Motorcycle

Click here to see wiring diagram

With the cycle - control it is possible to steer the functional
set-up starter / low beam - high beam / horn / direction
indicator R-L with a  micro button or foil button over
the vehicle ground at the installed handlebars or
handle fittings.

A short touch on of the micro button would steer the
function. Our blink transmitter is universal. independently
of load from 12 volt DC 0,1 - 100 W the blink frequency
remains unchanged.
No problems with Kellermann LED - direction indicators
or micro - direction indicators when mounted.

This module offers the following functions

- Left- and right direction 
  indicator. Clock pulse
 1 sec.
- Low beam light / High
  beam light.
- E-Starter.
- Horn
- Automatic shutdown
   direction indicator
   after 17 seconds

See Also:

• Kellerman Turn Signals - Kellerman Turn Signals and LED Indicators - BL-1000 LED Dark Indicator in Black Finish with super Dark Lens for Harley-Davidson, Chopper and Custom Motorcycle

Electronic – Box for Bikes!    This electronic box is designed to be used in conjunction with small push buttons. This enables the switches to be used for turn signals, hi / lo beam and horn operation. Only four wires are needed between switches and box. Integrated is a flasher unit working independent from the drawn amperage. It will work with small marker lights with 4W – bulbs without a change of flashing frequency. All functions can be activated by a push button. Flashers are started by the first push, next push will stop or change sides by pushing on the other side. Lights will change by every push between hi- and lo – beam. A must for every custom bike as a substitute to big stock switch housings.

More info download

See Also:

The Blackbox2 has all normal functions:flasher unit working independant from the drawn amperage, hi/lo beam and horn operation, Additionally you can use the function of an E-Start. Because of the small size there are now cable connections for an easy installation.


download wiring diagram

See Also: