Penz Custombikes - Frames and Motorcycles made in Austria - Wide Tire Kits for Harley

requires a RSD transmission

By Big Daddy kit it is possible the Metzeler 280 or the 300 Avon in all Evo and Twin Cam Softail models to obstruct the middle.

Up to a rim width of 10.5 of the tire runs centrally and without the troublesome primary offset to the left.

NEW: Now available for the 330er Avon, up to 12.5 rim.

In the original framework, only the fender struts are cut off (otherwise nothing needs to be cut).

The rocker is designed for a transmission with right side drive like eg Baker. For this we offer RSD transmission in our shop at.

By using the Baker RSD (right side drive) eliminates the primary gear shift, which affects not only the positive driving behavior, but also reduces the overall wear in the drivetrain. Since the entire off-set and various ancillary work is required, the price difference is a shift kit with drivable relatively small dimensions.

Furthermore, it is possible to use the following standard parts continued,
brake, brake, drive wheel (pulley) Belt, and in most cases, the standard seat in conjunction with the Big Mama Penz rear fender.

The wide tire swingarm modified Marlin (CNC machined steel swingarm) with belt guard and brake anchor for OEM brake, with a reinforced shaft (1) and an axle-which are also included.

Upon request, the entire kit or Big Daddy rocker and rear fender are delivered as individual components.

Select your choice from the drop down list below and click 'Check Price'.

There is No Delivery Charge on this item to a North American address.

requires a RSD Transmission

See when fitted (Pic 1)

See when fitted (Pic 2)

With the Big Mama Kit, it is possible the Metzeler 280 or the 300 Avon in all Evo and Twin Cam Softail models to obstruct the middle.

Up to a rim width of 10.5 "of the tire runs centrally and without the troublesome primary offset to the left.

NEW: Now available for the 330er Avon, up to 12.5 rim.

In the original framework, only the fender struts are cut off (otherwise nothing needs to be cut).

The rocker is designed for a transmission with right side drive like eg Baker. For this we offer RSD transmission in our shop at

By using the Baker RSD (right side drive) eliminates the primary gear shift, which affects not only the positive driving behavior, but also reduces the overall wear in the drivetrain. Since the entire off-set and various ancillary work is required, the price difference is a shift kit with drivable relatively small dimensions.

Furthermore, it is possible to use the following standard parts continued,
brake, brake, drive wheel (pulley) Belt, and in most cases, the standard seat in conjunction with the Big Mama Penz rear fender.

The welded steel pipe of 30 mm swingarm with belt guard and brake anchor for OEM brake, with a reinforced shaft (1 ) and an axle-which are also included.

Upon request, the entire kit or Big Mama rocker and rear fender are delivered as individual components.

Select your choice from the drop down list below and click 'Check Price'.

There is No Delivery Charge on this item to a North American address.

Penz Custombikes - Penz Big Wheel Kit for Evolution (1990) and Twin Cam 88B OEM frame to the tire width of 250 mm on a 9 inch rim

Click here to see larger picture

Click here to see fitted picture (1)

Click here to see fitted picture (2)

Click here to see fitted picture (3)

Click here to see fitted picture (4)

Click here to see fitted picture (5)

Click here to see fitted picture (6)

Penz Big Wheel Kit for Evolution (1990) and Twin Cam 88B OEM frame to the tire width of 250 mm on a 9  inch rim.

Components:
- wide tire swingarm Penz Marlin CNC machined steel swingarm, including raw axis, axle protection and stainless steel nuts and brake anchor for OEM brake. Ready for installation.

- Penz rear fender part with (Model B with detail) welded to the rear fender corresponding hardware including electronics. The rear section has all the edges rounded off and is ready for finishing.

Swingarm, rear fender and fender struts can be ordered as a complete kit or individually.

Select your choice from the drop down list below and click 'Check Price'.

There is No Delivery Charge on this item to a North American address.

See Also:

• R & R Cycles Inc - 113cu in Evo® Style American V Twin Billet Engine for Custom and Chopper Motorcycles