Twin Motorcycles - Twin Motorcycle - XR 1200 Exhaust, Torque Hammer, XR 1200 Suspension and Controls for XR 1200

Twin Motorcycles - Twin Motorcycle - XR 1200 Parts, XR 1200 Custom Parts for XR 1200, XR 1200 Cafe Racer - XR 1200 Adjustable Rearsets

Multi Adjustable,

Very sturdy, very little to no flex in these adjustable rear set.

Made from High grade Billet aluminum, Silver anodized with black foot pegs.

See Also:

• Twin Motorcycles - Twin Motorcycle - XR 1200 Parts, XR 1200 Custom Parts for XR 1200, XR 1200 Cafe Racer - XR 1200 Tail Tidy

Twin Motorcycles - Twin Motorcycle - XR 1200 Parts, XR 1200 Custom Parts for XR 1200, XR 1200 Cafe Racer - XR 1200 Black Diamond Footpegs

XR1200 Diamond Black Collection Footpeg with Wear Peg Shroud your bike in mystery.

These blacked-out footpegs feature distinctive knurled surfaces that expose the raw billet aluminum for a dramatic contrast.

Designed to age and 'break-in' like a pair of comfortable stone-washed jeans, the satin black finish will complement any paint color.

The narrow rubber bands and the knurled surfaces provide a positive grip.

Featuring a replacement wear peg, this slim footpeg design allows a comfortable pivot point, and the wide surface and large diameter end cap keep your boot in place to replace the original foot pegs

See Also:

• Twin Motorcycles - Twin Motorcycle - XR 1200 Tuning - Buell, XL Starter motor clutch assembly for all buell models, 08-10 XR and 95-09 XL

Twin Motorcycles - Twin Motorcycle - XR 1200 Parts, XR 1200 Custom Parts for XR 1200, XR 1200 Cafe Racer - XR 1200 6 Spoke Performance Wheels

Twin Motorcycles have developed a direct replacement 6 spoke forged aluminium set of wheels for your XR1200.

Available in Black or Gold Finish

The weight of the STOCK front wheel is 6,6 kilo (14,55 lb) The weight of the TM front wheel is 3,4 kilo (7,5 lb)

The weight of the STOCK rear wheel is 9,1 kilo (20.06 lb). The weight of the TM rear wheel is 4,5 kilo  (9,9 lb)

The weight of the wheels is measured with spacers and bearings installed.

Sizes are: front 3,5 x 17" and rear 5,5 x 17"

These wheels are direct replacement wheels for the stock Front Fork. No spacers needed original hardware can be used

Select your choice from the drop down list below and click 'Check Price'.

There is No Delivery Charge on this item to a North American address.

See Also:

• Twin Motorcycles - Twin Motorcycle - XR 1200 Tuning - XR 1200 2009-2010 stock ECM

Twin Motorcycles - Twin Motorcycle - XR 1200 Parts, XR 1200 Custom Parts for XR 1200, XR 1200 Cafe Racer - XR 1200 Suspension Upgrade Kit

XR1200 Suspension Upgrade kit.

Fits 2008-later XR1200 models.

Stock on '10-later XR1200X models.

This is an excellent upgrade for the 2008 and 2009 XR1200X models.

See Also:

• Twin Motorcycles - Twin Motorcycle - XR 1200 Parts, XR 1200 Custom Parts for XR 1200, XR 1200 Cafe Racer - XR 1200 Crash Bobbins

Twin Motorcycles - Twin Motorcycle - XR 1200 Parts, XR 1200 Custom Parts for XR 1200, XR 1200 Cafe Racer - XR 1200 Marzocchi RAC50 Front Fork Kit

TM XR1200 Marzocchi RAC50 front fork kit with Triple Clamp from Twin Motorcycles.

This Kit is complete kit with our Triple Clamp and 2 Marzocchi RAC50 front fork legs.

This kit offers replacement top and bottom triple clamps in lightweight CNC machined billet aluminium

In This kit you can fit the stock XR1200 wheel and disc. You can mount a couple of 108mm radial calipers.

Massive 50mm Marzocchi tubes for steering precision.

Factory adjustable with 13 clicks of compression tuneability and 32 clicks of rebound.

Dampening System is Coil/Hydraulic cartridge.

Factory Nitrite coated tubes and hard anodized sliders.

120mm stroke. Left and right hand legs only

See Also:

• Twin Motorcycles - Twin Motorcycle - XR 1200 Parts, XR 1200 Custom Parts for XR 1200, XR 1200 Cafe Racer - XR 1200 Detachable Sport Windscreen

Twin Motorcycles - Twin Motorcycle - XR 1200 Parts, XR 1200 Custom Parts for XR 1200, XR 1200 Cafe Racer - XR 1200 Suspension Raiser Blocks

Twin Motorcycles own developed rear suspension risers for the XR 1200.

The XR1200 is when it comes from the factory, more a HD bike than a Buell. It does not handle like a modern sport bike.

When mounting these raisers the rear passenger foortpegs need to be removed.

If you are using the stock or aftermarket exhaust pipes that attach to the passenger footrest then a new exhaust mount will need to be ordered.

By raising the rear height of your XR1200 you will get better steering capabilities.

These blocks will increase the height by +/-5 cm.

These blocks are designed for race use by Twin Motorcycles and the will let the XR1200 STEER MUCH QUICKER.

See Also:

• Twin Motorcycles - Twin Motorcycle - XR 1200 Tuning - Shiftlight GP Red/Green

Twin Motorcycles - Twin Motorcycle - XR 1200 Parts, XR 1200 Custom Parts for XR 1200, XR 1200 Cafe Racer - XR 1200 Cafe Racer Handle Bars

XR 1200 Cafe racer Handle Bars

Specially made for the Cafe racer kit to fit with the front fairing.

Perfectly brushed aluminium finish.

See Also:

• Twin Motorcycles - Twin Motorcycle - XR 1200 Parts, XR 1200 Custom Parts for XR 1200, XR 1200 Cafe Racer - XR 1200 Cafe Racer Tank Cover

Twin Motorcycles - Twin Motorcycle - XR 1200 Parts, XR 1200 Custom Parts for XR 1200, XR 1200 Cafe Racer - XR 1200 Clip on Bars

These are our own developed Clip-ons for the Twin Motorcycles XR1200, and have a 7° inclination, and can be made on every size.

This article is for the stock front fork size of your XR1200 and for use with Twin Motorcycles Triple Tree kit

This set can be ordered to mount with a different size front fork, if required

See Also:

• Twin Motorcycles - Twin Motorcycle - XR 1200 Parts, XR 1200 Custom Parts for XR 1200, XR 1200 Cafe Racer - XR 1200 Full Carbon Front Fender (1 piece)

Twin Motorcycles - Twin Motorcycle - XR 1200 Parts, XR 1200 Custom Parts for XR 1200, XR 1200 Cafe Racer - XR 1200 Black Handlebar LED Turn Signals (22mm)

By using 8 high power wide angle LED on each side of the circuit board the indicator is visible from both the front and back at the same time with equal luminosity.

This has a substantial improvement on the visibity of the indicators which adds highly to the safety of the motorcycle and rider.

Mounting on the end of the handle bar provides the greatest opportunity to be seen.

LED’s offer a much longer life than ordinary filament indicator bulbs.

These indicators are CNC machined from billet aluminium and are available in black or silver anodised.

Complete with stainless steel fasteners, sleeved cable and a brass collet to allow fitting to hollow handlebars for most motorcycle.

14mm to 22mm Indicator body size: 50mm long x 35mm dia

Select your choice from the drop down list below and click 'Check Price'.

There is No Delivery Charge on this item to a North American address.

See Also:

• Twin Motorcycles - Twin Motorcycle - XR 1200 Parts, XR 1200 Custom Parts for XR 1200, XR 1200 Cafe Racer - XR 1200 Triple Trees

Twin Motorcycles - Twin Motorcycle - XR 1200 Parts, XR 1200 Custom Parts for XR 1200, XR 1200 Cafe Racer - XR 1200 Ironside Heated Handgrips

CLICK HERE TO SEE OTHER STYLES AVAILABLE

Keep comfortable on those cool morning or frigid night rides.

Warm hands have a major impact on overall body comfort, and sometimes gloves just aren't enough.

These thermostatically controlled grips have variable heat settings and automatic temperature monitoring to adjust to changing ambient temperatures.

The grips remain at a constant temperature regardless of changes in outside temperature.

The self-contained control circuit and control knob means you have no additional switches or controller boxes to mount, and the grips are switched on/off with the ignition to avoid draining your battery.

The "glueless" grip design allows grip removal if you change handlebars or motorcycles.

Select your choice from the drop down list below and click 'Check Price'.

There is No Delivery Charge on this item to a North American address.

See Also:

Twin Motorcycles - Twin Motorcycle - XR 1200 Parts, XR 1200 Custom Parts for XR 1200, XR 1200 Cafe Racer - XR 1200 Mini Bullet LED Indicator Kit

XR1200 Mini-Bullet LED Turn Signal Kit - Black Housing

Take a new direction in lighting.

Bright, fast-acting LED turn signal elements are housed in sinister black mini bullet housings for definitive style.

The compact turn signals tuck in tight to the hand controls and the small size trims the rear profile for a custom look.

Available with smoked lenses, the kit includes front and rear signals and the required controller.

Fits '08-later XR models.

Installation requires Mounting Kit. Intended for use on HDI european models

Mounting kit includes the wiring harness, mounting brackets, and hardware required to install Mini-Bullet Turn Signals

Select your choice from the drop down list below and click 'Check Price'.

There is No Delivery Charge on this item to a North American address.

See Also:

• Twin Motorcycles - Twin Motorcycle - XR 1200 Parts, XR 1200 Custom Parts for XR 1200, XR 1200 Cafe Racer - XR 1200 Carbon fibre Primary Cover

Twin Motorcycles - Twin Motorcycle - XR 1200 Parts, XR 1200 Custom Parts for XR 1200, XR 1200 Cafe Racer - XR 1200 Smoked Turn Signal Lens Kit

XR1200 Smoked Turn Signal Lens Kit - Bullet Lens Add a unique touch to your bike.

This Turn Signal Lens Kit replaces the amber lenses for a clean front and rear appearance.

The kit includes four lenses and four amber bulbs.

Meets DOT requirements.

See Also:

• Twin Motorcycles - Twin Motorcycle - XR 1200 Parts, XR 1200 Custom Parts for XR 1200, XR 1200 Cafe Racer - XR 1200 Cafe Racer Kit

Twin Motorcycles - Twin Motorcycle - XR 1200 Parts, XR 1200 Custom Parts for XR 1200, XR 1200 Cafe Racer - XR 1200 Triple Trees

Here is the Twin Motorcycles Triple Tree Kit in aluminium for replacement of the stock XR12100 triple trees.

Fits all XR1200 models.

Manufactured by Style and Performance in Italy exclusively for Twin Motorcycles with the highest quality CNC machines.

This kit is made from high quality billet aluminium, these feature a super strong 3 bolt clamp on the lower trees and a single bolt top fixing.

With 1,5 Deg. less angle to reduce the trail and make the bike steer better

Available in black or silver

See Also:

• Twin Motorcycles - Twin Motorcycle - XR 1200 Parts, XR 1200 Custom Parts for XR 1200, XR 1200 Cafe Racer - XR 1200 Cafe Racer Front Fairing